Owner's Manual
(20PO) AP619DA ELECTRIC PUMP ENGLISH 4.875” X 7.25” 08/25/2022
20
PO
READ AND SAVE THESE INSTRUCTIONS
Page 2
NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to scale.
Due to a policy of continuous product improvement, Intex reserves the right to change
specifications and appearance, which may result in updates to the instruction manual,
without notice.
PARTS REFERENCE
4
3
1
6
5
9
2
10
7
8
OPERATING INSTRUCTIONS
General
• The air pump can also be controlled via the Intex Air Mattress Remote App from your
mobile device, see “Intex Air Mattress Remote App” section for details.
• The USB power socket is suitable for charging mobile devices such as smartphones and
tablets. Output rating: 5 V
, 2.0 A.
• Air beds are designed for temporary use and are NOT designed to be a replacement for
a traditional mattress.
• Make sure the area is flat, level, clean and free from sharp objects, and within reach of
an electrical outlet.
• The appliance must be positioned so that the plug is accessible.
• To prevent puncture or damage to the air bed, never drag the air bed across the floor. Lift
the inflated air bed when moving or changing location.
• No air pump maintenance is required.
• For cleaning use only clean cloth with mild soapy solution. Do not use any chemicals.
• In case of repairs, use only common PVC repair glue and patches. For flocked surfaces:
rub away the flocking material with an eraser first before applying the glue and/or patch.
Part Descriptions:
1. Inflation button ( )
2. Deflation button (
)
3. Deflation adjustment button (
)
4. Cord compartment cover
5. Cord compartment
6. AC line cord
7. Manual inflation port cap
8. Manual inflation port
9. USB power socket (5 V
, 2.0 A)
10. Air bed front
SERVICING OF A DOUBLE-INSULATED PRODUCT:
In a double-insulated product, two systems of insulation are provided instead of
grounding. No grounding means is provided on a double-insulated product, nor should
a means for grounding be added to the product. Servicing of a double-insulated product
requires extreme care and knowledge of the system, and should be done only by qualified
service personnel. Replacement parts for a double-insulated product must be identical to
those parts in the product. A double-insulated product is marked with the words “DOUBLE
INSULATION” or “DOUBLE INSULATED” and with the symbol .