Operation Manual

101
SAVE THESE INSTRUCTIONS
Page 10
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008
SSEETT--UUPP IINNSSTTRRUUCCTTIIOONNSS
SET-UP INSTRUCTION (continued)
English
For connection to filter pumps with 1-1/2” (38mm) hose size:
(Do not use adapter A (1) or B (10))
Drawing #2
9
FILTER
PUMP
1-1/2”(38mm) HOSE
1-1/2”(38mm) HOSE
SALTWATER
SYSTEM
SWIMMING POOL
WATER TO
POOL
PLUNGER
VALVE
WATER FROM
POOL
1. If your above-ground-pool is filled with water, close the plunger valves before
Saltwater System installation. Go to step 2 directly if your pool is empty.
2. Disconnect the water return (to the pool) hose from the filter pump connection,
and connect it to the Saltwater System outlet.
3. Connect the connector hose (9) to the filter pump outlet connection.
4. Open plunger valves to allow water to flow.