(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 OWNER’S MANUAL English 101 IMPORTANT SAFETY RULES Read, Understand, and Follow all Instructions Carefully before Installing and using this Product. Krystal Clear™ Deluxe Saltwater System (salt in pool) Model 8110 For illustrative purposes only.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 TABLE OF CONTENTS English 101 Warnings............................................................................... 3 Parts List & Reference......................................................... 4-6 Product Information & Specifications................................ 7 Set Up Instructions.............................................................. 8-12 Salt and Pool Water Volumes...
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 SAFETY RULES English 101 IMPORTANT SAFETY RULES Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product. READ AND FOLLOW ALL INSTRUCTIONS WARNING • To reduce the risk of injury, do not permit children to use this product. Always supervise children and those with disabilities. • Risk of electric shock.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 PARTS LIST English 101 PARTS LIST 1 2 3 4 5 6 7 8 9 10 11 * Optional * Optional NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to scale.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 PARTS REFERENCE English 101 PARTS REFERENCE Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. 3 8 7 2 1 4 5 6 5 9 10 11 NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to scale.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 PARTS REFERENCE English 101 PARTS REFERENCE (continued) Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. REF. NO. DESCRIPTION QTY. SPARE PART NO.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 PRODUCT INFORMATION/SPECS English 101 HOW THE CHLORINE IS GENERATED Common salt (sodium chloride) is made up of two elements, sodium and chloride. During the installation of your Saltwater System, a measured quantity of salt is dissolved in the pool water to make it slightly salty.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 SET-UP INSTRUCTIONS English 101 SET-UP INSTRUCTION IMPORTANT The Saltwater System must be installed as the last piece of pool equipment in the water return line to the pool as displayed in Drawing #1. This location extends the life of the titanium plates. 1. Assemble the above-ground-pool (AGP) and its filter pump per installation instructions. 2.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 SET-UP INSTRUCTIONS English 101 SET-UP INSTRUCTION (continued) 1. If your above-ground-pool is filled up with water, unscrew the strainer grids from the strainer connectors and insert the black hat-like plugs into the strainer connectors before saltwater pool system installation. Go to step 2 directly if your pool is empty. 2.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 SET-UP INSTRUCTIONS English 101 SET-UP INSTRUCTION (continued) For connection to filter pumps with 1-1/2” (38mm) hose size: (Do not use adapter A (1) or B (10)) Drawing #2 PLUNGER VALVE WATER TO POOL SWIMMING POOL WATER FROM POOL FILTER PUMP SALTWATER SYSTEM 1-1/2”(38mm) HOSE 9 1-1/2”(38mm) HOSE 1.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 SET-UP INSTRUCTIONS English 101 SET-UP INSTRUCTION (continued) For connection to other filter pump (with different type of thread or no thread): Saltwater System can also adapt to other filter pumps for those with different thread or without thread on the connection. • Connect to 1-1/4” (32mm) filter pump outlet connection: 10 9 FILTER PUMP 1-1/4”(32mm) CONNECTION SALTWATER SYSTEM 1.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 SET-UP INSTRUCTIONS English 101 SET-UP INSTRUCTION (continued) • Connect to 1-1/4” (32mm) hose: HOSE CLAMP 1 1-1/4”(32mm) HOSE SALTWATER SYSTEM 1. Connect the adaptor A (1) to the electrolytic cell (4) outlet. Tighten securely. 2. Connect the water return (to the pool) hose to the adaptor A (1) on the Saltwater System with a hose clamp.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 SALT & POOL WATER VOLUMES English 101 SALT & POOL WATER VOLUMES Use only Sodium Chloride Salts Use only sodium chloride (NaCl) salt that is at least 99.8% pure. It is also acceptable to use water conditioning salt pellets (the compressed forms of evaporated salt), but it will take longer time for them to dissolve. Do not use iodized or yellow (yellow prussiate of soda) colored salt.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 English 101 INTEX POOLS SALT TABLE This table shows how much salt to use to achieve the desired 3000 ppm salt level and how much will be needed to maintain this level if it drops below this desired level. Water Capacity (Calculated at Pool Size 90% for Frame Pool and 80% for Easy Set & Oval Pool) Salt Needed for Startup 3.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 English 101 INTEX POOLS OPERATING TIME TABLE This table shows the operating time required for normal use of the Saltwater System with AGP’s.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 OPERATING INSTRUCTIONS English 101 OPERATION INSTRUCTIONS After the salt is dissolved, but before starting the Saltwater System be sure that: • The entire filtering and chlorinating system is connected to a grounding type receptacle protected by a ground-fault circuit interrupter (GFCI).
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 OPERATING INSTRUCTIONS English 101 OPERATION INSTRUCTIONS (continued) 5. Operating hours can be re-adjusted if necessary. Follow steps 2 thru 4. 6. The scheduled operating hours displayed on the LED readout will decrease to zero as the unit operates. The LED shows “hours remaining” in the daily operating cycle. 7.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 ALARMS English 101 ALARM CODES No chlorine production will occur if “Low Water Flow”, “Low Salt Level” or “High Salt Level” are detected. If any of these conditions occur then the Saltwater System will sound an alarm that indicates chlorine production has stopped. A buzzer will sound and a Code (see below) will keep flashing on the LED for 1 hour.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 MAINTENANCE English 101 MAINTENANCE IMPORTANT Unplug power cord before cleaning and close plunger valves or insert black hat-like plugs in strainer opening to prevent water spillage. Plug in the power cord and open plunger valves or remove plugs when maintenance tasks are completed. Flow Sensor Cleaning 1.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 MAINTENANCE English 101 MAINTENANCE (continued) Visual Inspection and Cleaning: 1. Switch off the unit, unplug the power cord from the electrical socket. 2. For filter pumps with 1-1/4” (32mm) hose size - To prevent water from escaping the pool, unscrew the strainer grids from the strainer connectors and insert the hat-like plugs into the strainer connectors.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 MAINTENANCE English 101 MAINTENANCE (continued) 6. If flushing does not remove the deposits on the plate then disconnect the cell from the base by removing the 4 mounting screws (3). Disconnect the flow sensor from the top of the cell and unplug the electrolytic cell cord.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 MAINTENANCE English 101 POOL MAINTENANCE & CHEMICAL DEFINITIONS Preferred Water Chemistry Reading Minimum Ideal Free Chlorine 0 1.0 - 3.0 ppm Combined Chlorine 0 0 pH 7.2 7.4 - 7.6 Total Alkalinity 100 ppm 100 - 140 ppm Calcium Hardness 150 ppm 200 - 400 ppm Stabilizer (Cyanuric Acid) 10 ppm 30 - 50 ppm Maximum 3.0 ppm 0.2 ppm 7.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 TROUBLESHOOTING GUIDE English 101 TROUBLESHOOTING GUIDE PROBLEM CAUSE REMEDY INSUFFICIENT CHLORINE • Insufficient operating hours of the Saltwater System. • Insufficient (Less than 2000ppm) salt level in pool water. • Chlorine loss due to intense sunlight exposure. • The bather load has increased. • Clogged or dirty electrolytic cell.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 TROUBLESHOOTING GUIDE English 101 TROUBLESHOOTING GUIDE (continued) LED PANEL CODE PROBLEM REMED LED Panel Code Flash & Alarm On (NOTE: Always turn off the power before cleaning and servicing). 1. Circulation line is blocked. • Ensure the plunger valves are opened (if any). • Ensure your filter cartridge, cell are clear from debris and dirt. See “Maintenance”.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 SAFETY GUIDELINES English 101 GENERAL AQUATIC SAFETY Water recreation is both fun and therapeutic. However, it involves inherent risks of injury and death. To reduce your risk of injury, read and follow all product, package and package insert warnings and instructions.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 English 101 LIMITED WARRANTY PARTS Your Krystal Clear™ Saltwater System has beenLIST manufactured using the highest quality materials and workmanship. All Intex products have been inspected and found free of defects prior to leaving the factory. This Limited Warranty applies only to the Krystal Clear™ Saltwater System.
SAVE THESE INSTRUCTIONS TO AVOID SERIOUS INJURY ALL POOL USERS MUST KNOW AND FOLLOW THESE SAFETY RULES. • No glass in pool area. • No running, jumping, or horseplay in or around pool. • Be familiar with the pool before swimming. • Don’t swim when using alcohol or drugs. • Children must be accompanied by an adult. • Be Safe. Swim with a friend.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 English COUNTRIES/REGIONS SERVICE CENTER LOCATIONS • UNITED STATES • CANADA INTEX RECREATION CORP. 14779 Bar Harbor Road Fontana, CA 92336 Tel: 1-800-234-6839 Fax: 310-549-2900 Website: www.intexcorp.com (U.S./Canada only) Consumer Service Hours: 8:30 am to 5:00 pm Pacific Time, Mon. thru FRI. only. • MEXICO KAY INTERNACIONAL, S.A. DE C.V. Avenida San Jeronimo #550-5° Piso, Col.
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008 INTEX ® English For Residents of the U.S. & Canada: INTEX RECREATION CORP. Attn: Consumer Service 14779 Bar Harbor Road Fontana, CA 92336 Phone: 1-800-234-6839 Fax: (310) 549-2900 Consumer Service Hours: 8:30 am to 5:00 pm Pacific time Monday thru Friday only Website: www.intexcorp.com For Residents outside of the U.S.