User Manual

(155PO) POOL LIGHT ENGLISH 7.5” X 9.25” PANTONE 295U 08/18/2015
English
SAVE THESE INSTRUCTIONS
155
PO
Page 6
SETUP INSTRUCTIONS (continued)
Installation on Intex Sequoia Spirit Wood-Grain Pools:
Unscrew the bolts from the section where the LED pool-wall light will be installed, and remove the
clamp covers, the top board and the side boards. Refer to the Wood-Grain Pool owner’s manua
for details. For better installation, it is recommended to remove at least 3 side board panels. Follow
above setup instructions 1 to 4.
4 5
There are two mounting holes located at the bottom of the transformer base.
The transformer can be mounted on a cement base or onto a wooden platform.
See drawing below.
STATIONARY MOUNTING
110.5 mm
1.
The mounting holes are 5 mm in diameter and spaced 110.5 mm apart.
2.
Use two bolts and lock nuts with a maximum of 5 mm in diameter.