User guide

(118PO) ULTRA FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 07/20/2012

118

SAVE THESE INSTRUCTIONS

Page 11

English

STORAGE

WINTER PREPARATIONS

Winterizing your Above Ground Pool

After usage, you can easily empty and store away your pool in a safe

place. You must drain, disassemble and properly store the pool

when the temperature drops below 41 degrees Fahrenheit (5 degrees

Celsius) to prevent ice damage to the pool and related components.

Ice damage can result in sudden liner failure or pool collapse. Also

see the section “How To Drain Your Pool’’.

Should temperatures in your area not drop below 41 degrees

Fahrenheit (5 degrees Celsius), and you choose to leave your pool out,

prepare it as follows:

1.Cleanthepoolwaterthoroughly.IfthetypeisanEasySetPooloran 

Oval Frame Pool, make sure that the top ring is properly inflated).

2.Removetheskimmer(ifapplicable)oranyaccessoriesattachedtothe

threaded strainer connector. Replace strainer grid if necessary. Be sure

all accessories parts are clean and completely dry before storage.

3. Close the Inlet and Outlet Plunger Valve.

4.Removetheladder(ifapplicable)andstoreinasafeplace.Besurethe

ladder is completely dry before storage.

5. Remove the hoses that connect the pump and filter to the pool.

6. Add the appropriate chemicals for the winter period. Consult your local

pool dealer as to which chemicals you should use and how to use them.

This can vary greatly by region.

7. Cover pool with Intex Pool Cover. IMPORTANT: INTEX POOL COVER

IS NOT A SAFETY COVER.

8. Clean and drain the pump, filter housing and hoses. Remove and discard

 theoldfiltercartridge.Keepasparecartridgeforthenextseason).

9. Bring pump and filter parts indoors and store in a safe and dry area,

 preferablybetween32degreesFahrenheit(0degreesCelsius)and104

 degreesFahrenheit(40degreesCelsius).