User guide

1
20
PO
SAVE THESE INSTRUCTIONS
Page 11
(120PO) SEQUOIA SPIRIT
®
WOOD-GRAIN FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 10/06/2011
English
GROUND PREPARATION
Select an outdoor location for the pool which should be on a level concrete pad. If there is no
concrete pad available, follow the instructions below to prepare the installation area. It is
important you ask a professional (builder or gardener) to perform the following ground
p
reparation.
NOTE: Tools are not included.
1. Mark the installation area
• Once the location area is chosen, drive stake at center point of where you wish pool to
be located. Attach string to center stake. Measure the length A on string, and attach
marking stick, paint marker, or funnel with flour to string. Mark circumference of pool
area using string and marker (see drawing 1.1).
• For 15'8" (478 cm) pool, where
A = 8’3” (251.5 cm) = Radius of grass area need to be removed and leveled.
For 16'8" (508 cm) pool, where
A = 8'9” (266.7 cm) = Radius of grass area need to be removed and leveled.
For 18’8" (569 cm) pool, A = 9'9" (297.1 cm)
see drawing 1.2.
SSEETTUUPP IINNSSTTRRUUCCTTIIOONNSS
POOL SETUP (continued)
A
A
B
1.1
1.2