User's Manual

(337PO) FLOATING POOL SPEAKER WITH LED LIGHT ENGLISH SIZE: 4.875” X 7.25” 07/29/2017
337
PO
SAVE THESE INSTRUCTIONS
Page 4
Operation instructions:
1. Turn ON: Press
button for 2 seconds, the
device will emit a sound and ash a blue light
for 1 second. For rst time after purchase, a
blue light will ash indicating the speaker is in
pairing mode. See below “Pairing and
Connecting” section for details.
Turn OFF: Press
button for 2 seconds, the
device will emit a sound and ash a red light for 1 second.
2. Pause / Play:
When the speaker is playing the music, press button once to pause the music, press
again to continue playing the music.
3.
Volume adjustment:
Press and hold button to increase the volume.
Press and hold button to decrease the volume.
4.
Changing song:
When the speaker is playing the music, short press button to switch to the "last"
song, short press button to switch to the "next" song.
5. Pairing and connecting with a Bluetooth device:
Pairing is required to mutually register the information on Bluetooth devices. It is
necessary to pair a device with the speaker to be able to make a Bluetooth connection
for the rst time. The speaker can be paired with one Bluetooth device only. Before
operating the speaker do the following:
• Place the Bluetooth device within 1 m (3 ft) of the speaker.
• Make sure the speaker’s batteries are new and stop playback on the Bluetooth device.
• Prepare the operating instructions supplied with the Bluetooth device for reference.
a) Turn on the speaker. When the speaker is turned on for the rst time after purchase,
a blue light will begin to ash and the speaker goes into pairing mode automatically
by just turning on the speaker.
b) Perform the pairing procedure on the Bluetooth device; it will display a list of detected
devices, select “
FLS625”.
c) The Bluetooth device will make the Bluetooth connection, when the connection is
established the speaker ashing blue light will go away and the multi-color changing
lights will light up.
Note:
• Whenever the speaker is turned on, the speaker tries to make a Bluetooth connection
with the last connected Bluetooth device. If the device is nearby and its Bluetooth
function is on, the Bluetooth connection is established automatically and the multi-color
changing light is lit.
• When you want to connect another Bluetooth device, terminate the current Bluetooth
connection by operating the currently connected Bluetooth device.
• If the Bluetooth connection is not established within 10 minutes, the speaker will turn off
automatically.