Manualshelf

Instructions

ManualsBrandsIntesis ManualsAutomationDaikin VRV Gateway RS-485 1 pc(s)
12
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL
https://www.intesis.com
Interfaz INMBSDAI001R000
Interface INMBSDAI001R000
Doc.Rev.3.6
IMPORTANTE: Es necesario resetear el equipo (quitar tensión) tras modificar
la configuración de los micro interruptores para que ésta se aplique.
IMPORTANT: It is required to reboot or power cycle the interface every time
the DIP switch configuration changes.
SW1-P1..4
Descripción
Description
SW3-P7..8
SW4-P3
Descripción
Description
SW4-P1..2-4
Descripción
Description
Esclavo .- Un Control Remoto Daikin BRC debe ser
presente en el bus P1 P2, configurado como Master
Slave – A Daikin BRC Controller must be present in the P1
P2 bus, configured as Master (Default value).
2400bps
Los valores de temperatura en los registros Modbus se
representan en decigrados (x10)
Temperature values in Modbus register are represented in
decidegrees (x10)
Maestro – No es necesario un Control Daikin BRC en el
bus P1 P2. Si existe, debe ser configurado como Esclavo.
Master - No need of a Daikin BRC Controller in the P1 P2
bus. If it exists, must be configured as Slave.
4800bps
Los valores de temperatura en los registros Modbus se
representan en grados (x1) (Valor por defecto).
Temperature values in Modbus register are represented in degrees
(x1) (Default value).
Maestro del Modo de Operación (Solo para VRV)
Master of Operation Mode (For VRV only)
9600bps
(Valor por defecto
default value)
Los valores de temperatura en los registros Modbus se
representan en grados Fahrenheit
Temperature values in Modbus register are represented in
Fahrenheit degrees
Esclavo de Modo de Operación (Solo para VRV)
(Valor por defecto)
Slave of Operating Mode (For VRV only) (Default value)
19200bps
Los valores de temperatura en los registros Modbus se
representan en grados Celsius (Valor por defecto)
Temperature values in Modbus register are represented in Celsius
degrees (Default value)
Reservado (Valor por defecto)
Not used (Default value)
38400bps
Resistencia interna de 120Ω conectada al bus EIA-485
Internal termination resistor of 120Ω connected to EIA-485 bus
Reservado
Not used
57600bps
Bus EIA-485 sin resistencia de terminación (Valor por defecto).
EIA-485 bus without termination resistor (Default value).
Muestra la temperatura ambiente proporcionada por la
Unidad Interior de Daikin (Valor por defecto)
Daikin Indoor Unit ambient temperature reading
(Default value)
76800bps
Muestra la temperatura ambiente proporcionada por el
Control Remoto de Daikin
Daikin Remote Controller ambient temperature reading
115200bps
Dirección de esclavo Modbus - Modbus Slave address
Direcc
Add
SW3-P1..6
Direcc
Add
SW3-P1..6
Direcc
Add
SW3-P1..6
Direcc
Add
SW3-P1..6
Direcc
Add
SW3-P1..6
Direcc
Add
SW3-P1..6
0
11
22
33
44
55
1
12
23
34
45
56
2
13
24
35
46
57
3
14
25
36
47
58
4
15
26
37
48
59
5
16
27
38
49
60
6
17
28
39
50
61
7
18
29
40
51
62
8
19
30
41
52
63
9
20
31
42
53
10
21
32
43
54
Configuración del número de esclavo Modbus y baudios.
Configuration of Modbus Slave number and baud rate.
Configuración de los baudios, magnitud temperatura (x1/x10), unidades de
temperatura (ºC/ºF) y resistencia de terminación de EIA-485.
Configuration of baud rate, temperature magnitude (x1/x10), temperature
units (Cº/Fº) and termination resistor for EIA-485.
EIA485
A+ B-
P1 P2
AC Unit
SW3
SW4
SW1
1 2 3 4
SW1
1 2 3 4
SW4
1 2 3 4 5 6 7 8
SW3
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
Configuración por micro interruptores
Configuration through DIP switches
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
ON SAB
Configuración Maestro/Esclavo, Esclavo del Modo de Operación, Modo de la lectura
de temperatura ambiente
Master/Slave, Master/Slave of Operating Mode, Ambient temperature reading
mode
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
This marking on the product, accessories, packaging or literature (manual) indicates that the product contains electronic
parts and they must be properly disposed of by following the instructions at https://intesis.com/weee-regulation