Operation Manual

34
35
Cleaning earmoulds
1. Remove the earmould and attached tubing from the
hearing instruments prior to cleaning.
2. Clean the earmould using a mild soap, and rinse with
lukewarm water.
3. After cleaning, dry earmoulds thoroughly and remove
any residual water and debris from the tubing utilising
an air bulb and wire loop.
i
Earmould tubing may become stiff, brittle, or discol-
oured over time. Contact your hearing care professional re-
garding tube changes.
Cleaning thin tubes and domes
1. Remove thin tubes from hearing instruments before cleaning by unscrewing
them counter clockwise.
2. Wipe down thin tubes and domes with a damp cloth.
3. In order to clear the thin tube of moisture and debris, push the black cleaning
rod through the thin tube, beginning at the end opposite the dome.
i
Thin tube and dome systems should be changed every three months or
sooner, should the components become stiff or brittle.
Scan a QR code with your
smart phone and watch a
instruction video.