Operation Manual

20
21
Push button
Depending on your experience level with hearing in-
struments, individual hearing needs, and the type of
listening environments you experience, your hearing
care professional may activate additional programmes.
If additional programmes have been activated, the fol-
lowing list explains how they work.
1. You can switch between programmes by pushing
the push button once.
2. You will then hear one or more beeps. The number of beeps indicates which
programme you have selected (one beep = programme one, two beeps =
programme two, etc.).
3. When the hearing instruments are turned off and then back on, the hearing
instrument always returns to the default setting (programme one).
Operation of the hearing instrument
Volume control (optional)
The volume control will allow the volume of hearing
instruments to be increased or decreased.
1. To increase the volume, push the volume
control up or move the wheel upwards.
2. To decrease the volume, push the volume
control down or move the wheel downwards.
When volume is increased or decreased, a beep signal will be
heard for each incremental change. When the upper or lower limits of the volume range are reached, a beep
signal with a longer duration will be heard. During the fitting of the instrument, your hearing care professional
will have chosen an optimal volume setting for you. When switching the instrument on, the volume will have
this optimal setting.
Scan a QR code with your
smart phone and watch a
instruction video.
Scan a QR code with your
smart phone and watch a
instruction video.