Specification Sheet

INTERTAPE POLYMER GROUP
®
TECHNICAL DATA SHEET
Sheathing Tape
DESCRIPTION
Aggressive, UV-resistant solvent acrylic
based pressure-sensitive adhesive combined
with the conformability of UV stabilized
polypropylene film provides superior sealing,
protective benefits, and ease of handling that
are the characteristics of a high-quality
product. Designed and engineered primarily
for permanent seaming and sealing of joints
in foam insulation and other sheathing
materials, to secure lap edges in house
wraps and other vapor barriers, repair rips
and tears in roll and batt insulation,
construction films and membranes.
Eliminates drafts around window and door
openings. Superior bonding at sub-zero (as
low as -40°C) or at elevated temperatures.
PRODUCT APPLICATIONS
Multi-purpose construction tape to prevent air
infiltration, provide vapor barrier protection,
and enhance appearance. Surfaces need to
be clean and dry. Do NOT apply to wet
surfaces (facing or wood). May be hand or
machine applied. Lap intersecting joined
tapes a minimum of 50.8 mm (2”). Tape
should be centered over the joint or other
area to be scaled.
100 Paramount Drive, Suite 300 | Sarasota, FL 34232 | USA
Customer Service: 800.IPG.8273 | 800.474.8273
Tape Technical Service: 877.447.4832
www.itape.com | [e-mail]
While we believe them to be reliable, the statements and information
herein are only for general guidance and are not warrants or
guarantees for accuracy and completeness. The user must, by test
or otherwise, determine suitability for this purpose. There is no
warranty of fitness for a particular purpose. Our standard term and
conditions of sale apply exclusively to all orders, and all liability for
damages of any kind, including consequential, exceeding purchase
price is excluded. No one is authorized by us to make oral
warranties. We reserve the right to make changes without notice or
obligation in our products and publications.
NOMINAL VALUES
The following data are nominal values based on PSTC,
ASTM and other standard tests. The data should not be
considered as specifications.
Backing 1.6 mil / 40 µm BOPP
Adhesive Solvent Cast Acrylic
Tensile Strength (lbs/in of width) 30 (131 N/25mm)
PSTC131
Adhesion to Steel (oz/in of width) 40 (10.9 N/25mm)
PSTC101-F
Elongation (% at break) 120
PSTC131
Total Thickness (mils) 3.0 (0.076mm)
PSTC133
Application Temperature 0°F to +122°F
(-18°C to +50°C)
Temperature Resistance -40°F to +212°F
(-40°C to +100°C)
Color Red, White
EFFECTIVE: 05/18