Operation Manual

ENGLISH - 15 ENGLISH - 16
5 – Phone/GPS
F5MC can be used together with Bluetooth® devices, as mobile phones, GPS devices, MP3
players.
To each F5MC unit is possible to connect, in the same me, max two Bluetooth® devices,
except when an INTERCOM conference is acve with three or four units (as described at
chapters 4.3 / 4.4).
5.1 Pairing
Before using the F5MC unit with these devices, is necessary to run the pairing procedure.
This is necessary only once, aer F5MC will automacally recognize and connect devices
already paired.
Pairing procedure
1. Start Bluetooth® service on mobile phone / GPS / MP3 player (check the device’s
user guide for more details).
2. With F5MC in Standby mode (led BLUE (6) ashing), press UP (2) buon and then
press MFB (1) buon to acvate “SETUP” menu. Press UP (2) buon twice, F5MC
will enter in “PAIRING MODE” .
3. Start searching for new Bluetooth® devices on mobile phone / GPS / MP3 player.
4. Aer few moments the device in searching mode will list “Interphone F5MC”. Select
it.
5. If prompted for a PIN number, type “0000” (four mes the zero number).
6. F5MC vocal guide will conrm the successful pairing with the message “PAIRING
SUCCESSFUL, CONNECTED TO PHONE”. F5MC will go in Standby mode, the led BLUE
(6) will ash twice, every three seconds.
7. If the Bluetooth® device ask authorizaon to phonebook access, conrm.
If you want to pair a second device, repeat the pairing procedure from step 1).
4.6 Intercom ps
Once acvated the intercom channel, communicaon remains acve unl it is manually
stopped by the rider. It is suggested to suspend the intercom conversaon, if not necessary,
to opmize baery life.
During the conference with three/four riders, in order to ensure the best system stability,
it is suggested to don’t connect other Bluetooth ® devices (phones, GPS, etc..) to the units.
The best behavior of the group conference is guarantee only using Interphone branded
intercom units.
“INTERCOM” audio quality is strongly inuenced by:
● proper installaon of speakers and microphone inside the helmet. Always check
very carefully that speakers are placed exactly on your ears, and microphone is
placed as close as possible to your mouth. Any error on these posions will cause
an important decrease of performances.
● environment (electromagnec interference, natural obstacles, etc.).
● aerodynamic protecon of your motorcycle.
● type of helmet used.