Operation Manual

ENGLISH - 19 ENGLISH - 20
When the signal strength is not enough weak to acvate the re-tune to
an alternave frequency, the listening quality could be decreased due to
the low quality of signal. FM staons listening is strongly inuenced by the
environment (EMC noise, poor signal coverage, etc).
During the FM radio listening, it is possible to go in Standby mode (led BLUE (6) ashing-
menu “INTERCOM”), pressing the MFB (1) buon.
7 – Music streaming
With F5MC is possible to listen to music from an A2DP Bluetooth® device (smartphone,
MP3 player, etc..). To play music from these devices is necessary to pair the F5MC unit
with the music source device (Chapter 5.1).
7.1 Music play
With F5MC in Standby mode (led BLUE (6) ashing), push DOWN buon for three mes
and then press the MFB (1) buon to acvate the “MUSIC STREAMING” menu.
Play/Pause
Push the MFB (1) buon unl the beep to
play/pause the music.
Track select
Press UP (2) or DOWN (3) buon to select
the previous or the next track.
During the music listening, it is possible to go in Standby mode (led BLUE (6) ashing-
menu “INTERCOM”), pressing the MFB (1) buon. To resume the music listening it will be
necessary to go again into “MUSIC” menu, as described at beginning of this chapter.
6 – FM radio
F5MC includes an integrated FM RDS radio receiver with memory to store eight radio staons.
To start the FM radio listening, with F5MC in Standby mode (led BLUE (6) ashing), push
DOWN (3) buon for two mes and aer press the MFB (1) buon to acvate the “FM
RADIO” menu.
Frequency scan
Press UP (2) buon to start frequency scan
up (from 88 MHz to 108 MHz).
Press DOWN (3) buon to start frequency
scan down (from 108 MHz to 88 MHz).
Memory scan
Press UP (2) buon unl the beep to select
the next FM staon memorized.
Press DOWN (3) buon unl the beep to
select the previous FM staon memorized.
Store FM staon
Press MFB (1) buon unl the beep, to save
the FM staon you are listening.
Press UP (2) or DOWN (3) buon to select
the memory nr (from nr.1 to nr.8).
Press once MFB (1) buon to conrm the
memory nr (from nr.1 to nr.8).
“RDS” allows these features:
● allows the F5MC receiver to re-tune to a dierent frequency, providing the same
staon when the rst signal becomes too weak.
● when F5MC re-tunes to a dierent frequency, the vocal help (TTS) will speak the
name and the frequency of the FM staon.