Operation Manual

ITALIANO - 17 ITALIANO - 18ENGLISH - 17 ENGLISH - 18
6 – FM radio
F4MC includes an integrated FM RDS radio receiver with memory to store eight radio staons.
To start the FM radio listening, with F4MC in Standby mode (led BLUE (6) ashing), push
DOWN (3) buon for two mes and aer press the MFB (1) buon to acvate the “FM
RADIO” menu.
Frequency scan
Press UP (2) buon to start frequency scan
up (from 88 MHz to 108 MHz).
Press DOWN (3) buon to start frequency
scan down (from 108 MHz to 88 MHz).
Memory scan
Press UP (2) buon unl the beep to select
the next FM staon memorized.
Press DOWN (3) buon unl the beep to
select the previous FM staon memorized.
Store FM staon
Press MFB (1) buon unl the beep, to
save the FM staon you are listening.
Press UP (2) or DOWN (3) buon to select
the memory nr (from nr.1 to nr.8).
Press once MFB (1) buon to conrm the
memory nr (from nr.1 to nr.8).
“RDS” allows these features:
● allows the F4MC receiver to re-tune to a dierent frequency, providing the same
staon when the rst signal becomes too weak.
● when F4MC re-tunes to a dierent frequency, the vocal help (TTS) will speak the
name and the frequency of the FM staon.
5.4 Phone ps
If two dierent phones are connected at the same me to a single F4MC unit, the features
“Redialling last number” e “Voice dial” can be used only with the FIRST connected phone.
The second connected phone can only receive calls, or managed by hand commands
directly on the phone.
Depending on the phone model it could be necessary to have an acve internet connecon
to use the “Voice dial” feature.
The “Voice dial” feature could not be supported by your phone. Check the phone user
manual for more details.
From “SETUP” menu is possible to change two sengs for the phone usage (Caller ID ON/
OFF e Voice answer ON/OFF), see chapter 3.1 for more details.
From “PHONE” menu, it is possible to go in Standby mode (led BLUE (6) ashing-menu
“INTERCOM”), pressing once the MFB (1) buon.
5.5 GPS
Aer compleng the pairing between F4MC and GPS device (see chapter 5.1) is possible
to listen to vocal instrucons from the GPS for the roung. The GPS will stop any intercom
communicaon each me that will send a vocal instrucon.
Check that the GPS device is compable with Bluetooth® headsets, “HFP”
Bluetooth® prole has to be supported by GPS. Check GPS user guide
for more details. F4MC uses the “HFP” Bluetooth® prole to manage the
connecon with GPS devices.
Navigaon apps, installed on smartphone devices, use the A2DP Bluetooth® prole to send
roung indicaons to headset. This prole doesn’t let to automacally stop the intercom
communicaon when needed.
Car GPS navigator usually don’t support the HFP Bluetooth® prole. For this reason these
devices can’t send vocal roung instrucons to Bluetooth® headset. Check GPS user guide
for more details.