Operation Manual

ITALIANO - 15 ITALIANO - 16ENGLISH - 15 ENGLISH - 16
5.2 Incoming phone calls
As indicated in chapter 2.6, phone calls have the highest priority and will override each
of other F4MC feature. During an incoming phone call these are the possible commands:
Answer to a phone call
Push MFB (1) or pronounce loudly any
word (in case that voice answer feature is
enabled Chapter 3.1).
End a phone call Push once the MFB (1) buon.
Reject a phone call
Push DOWN (3) buon to reject.
Otherwise wait for 15 seconds, the call
will be automacally rejected.
Ringtone mung
Push UP (2) buon to mute the ringtone.
5.3 Phone
All features related to phone can be acvated entering into “PHONE” menu of F4MC.
With F4MC in Standby mode (led BLUE (6) ashing), push DOWN (3) buon one me and
then press the MFB (1) buon to acvate the “PHONE” menu.
Redialling last number Press UP(2) buon to redial last number.
Voice dial
Press DOWN(3) buon to acvate the
voice dial feature of the phone. Follow
phone’s prompts to complete the task.
5 – Phone/GPS
F4MC can be used together with Bluetooth® devices, as mobile phones, GPS devices, MP3
players.
To each F4MC unit is possible to connect, in the same me, max two Bluetooth® devices.
5.1 Pairing
Before using the F4MC unit with these devices, is necessary to run the pairing procedure.
This is necessary only once, aer F4MC will automacally recognize and connect devices
already paired.
Pairing procedure
1. Start Bluetooth® service on mobile phone / GPS / MP3 player (check the device’s
user guide for more details).
2. With F4MC in Standby mode (led BLUE (6) ashing), press UP (2) buon and then
press MFB (1) buon to acvate “SETUP” menu. Press UP (2) buon twice, F4MC
will enter in “PAIRING MODE” .
3. Start searching for new Bluetooth® devices on mobile phone / GPS / MP3 player.
4. Aer few moments the device in searching mode will list “Interphone F4MC”. Select
it.
5. If prompted for a PIN number, type “0000” (four mes the zero number).
6. F4MC vocal guide will conrm the successful pairing with the message “PAIRING
SUCCESSFUL, CONNECTED TO PHONE”. F4MC will go in Standby mode, the led BLUE
(6) will ash twice, every three seconds.
7. If the Bluetooth® device ask authorizaon to phonebook access, conrm.
If you want to pair a second device, repeat the pairing procedure from step 1).