Operation Manual

ITALIANO - 11 ITALIANO - 12ENGLISH - 11 ENGLISH - 12
4.1.2 Pairing with an INTERPHONE unit (not MC).
With your unit in Standby mode (led BLUE (6) ashing):
1. press once the UP(2) buon and then press once the MFB (1) buon to acvate
the “SETUP” menu.
2. Press three mes the UP(2) buon to select “INTERCOM DEVICE SEARCH” feature,
press the MFB (1) unl the beep to start the search.
3. On the second Interphone unit (previous series not “MC”), with unit o, push and
keep pressed the MFB buon unl the alternate ashing red/blue of unit led.
4. Aer few seconds the units will be paired, intercom connecon will be
automacally started (led BLUE (6) on). To stop the intercom communicaon press
once MFB (1) buon on one of the two units.
4.1.3 Pairing with units not Interphone (other brands) - ANYCOM.
With your unit in Standby mode (led BLUE (6) ashing):
1. press once the UP(2) buon and then press once the MFB (1) buon to acvate
the “SETUP” menu.
2. Press four mes the UP(2) buon to select “ANYCOM SEARCH” feature, press the
MFB (1) unl the beep to start the search.
3. On the second unit NOT Interphone start the “phone search/phone pairing mode”,
see user manual of NOT Interphone unit for more details.
4. Aer few seconds the units will be paired, intercom connecon will be
automacally started (led BLUE (6) on). To stop the intercom communicaon press
once MFB (1) buon on your F4MC unit.
4.1.4 Pairing up to four other units (TOGGLING)
Follow chapters before (4.11/4.1.2/4.1.3) to pair your F4MC with other four units.
Every me one unit is paired with your F4MC, the last paired unit switchs in the next
Intercom channel as shown in the following chart:
Single unit
pairing
Twin units
pairing
Three units
pairing
Four units
pairing
Further units
pairing
Intercom A 1° paired unit 2° paired unit 3° paired unit 4° paired unit
Further
paired unit
Intercom B - 1° paired unit 2° paired unit 3° paired unit 4° paired unit
Intercom C - - 1° paired unit 2° paired unit 3° paired unit
Intercom D - - - 1° paired unit 2° paired unit
Pairing erased
1° paired unit
4 – Intercom
F4MC allows intercom communicaon between bike to bike (INTERCOM) and also up to 4
other riders (INTERCOM TOGGLING) one to one.
4.1 Pairing
Before starng the communicaon between headsets, is necessary to pair together the
units. This process has to be done only one me. F4MC will automacally recognize devices
previously paired.
F4MC is compable with all range of INTERPHONE device (also previous series) and by
ANYCOM funcon is also compable with other brands of helmet Bluetooth headsets.
Each F4MC can be paired to maximum four other units.
4.1.1 Pairing with an INTERPHONE MC unit
With both units in Standby mode (led BLUE (6) ashing):
1. On your F4MC unit press once the UP(2) buon and then press once the MFB (1)
buon to acvate the “SETUP” menu.
2. Press three mes the UP(2) buon to select “INTERCOM DEVICE SEARCH” feature,
press the MFB (1) unl the beep to start the search.
3. On the other unit (F4MC or F4MC or F3MC) press UP(2) buon and then press once
MFB (1) buon to acvate the “SETUP” menu.
4. Press UP(2) buon two mes, the second MC unit will go in “PAIRING MODE”.
5. Aer few seconds the units will be paired, intercom connecon will be automacally
started (led BLUE (6) on). To stop the intercom communicaon press once MFB (1)
buon on one of the two units.