USER MANUAL www.interphone.com Export Dept. international.interphone@cellularline.com www.interphone.
1 – Introduction 1.1 Hello! Thank you for choosing our product. InterphoneF4MC is a Bluetooth® helmet headset for wireless entertainment and communication system among multiple bikers. InterphoneF4MC can be installed on most helmets by attachment / detachment quick bracket. The ergonomic shape of the unit is user-friendly also with motorbike gloves. InterphoneF4MC is waterproof tested, up to IP67 protection degree (using the sealant provided). Index: 1.2 Main features 1. Introduction 4 2.
1.3 Box contents 2 – Getting Started B A C 6 2 8 4 D E 1 F 3 7 5 Pic.2 H (1) (2) (3) (4) (5) (6) (7) (8) G J GUIDA RAPIDA IT I SI CONSIGLIA DI VERIFICARE LA PRESENZA DI AGGIORNAMENTI SOFTWARE SUL SITO WWW.INTERPHONE.COM MFB button UP button DOWN button Volume + button Volume - button Blue led Red/Green/Orange led Connector www.interphone.com Pic.1 A. B. C. D. E. 2.1 Main Commands (Pic.
If you select a wrong language, follow the steps below: 2.2 Status led (Pic.2) Standby BLUE led (6) flashes every 3 seconds. Intercom active BLUE led (6) is solid . Interphone connected with mobile/GPS BLUE led (6) flashes twice every 3 seconds. Pairing mode BLUE (6) and RED (7) led flash alternately. Charging ORANGE led (7) is solid. When charging is completed led (7) becomes solid GREEN. Battery low Led (7) is solid RED. 2.
3.1 System settings 3 – Settings You can easily customize your F4MC . From Standby mode (Blue led (6) flashing), press UP button (2) and after MFB button (1) to active “SETUP” menu, entering in the main functions Pic.3.
4.1.2 Pairing with an INTERPHONE unit (not MC). 4 – Intercom F4MC allows intercom communication between bike to bike (INTERCOM) and also up to 4 other riders (INTERCOM TOGGLING) one to one. 4.1 Pairing Before starting the communication between headsets, is necessary to pair together the units. This process has to be done only one time. F4MC will automatically recognize devices previously paired.
4.2 Intercom communication between two units (from “INTERCOM” menu) To start an intercom communication between your F4MC (unit nr1 Pic. 4) and another one (unit nr2 Pic. 4) follow these steps: 1. Pair units 1 and 2 (chapters 4.1.1/4.1.2/4.1.3), this is necessary only once. 2. With your F4MC unit in Standby mode (led BLUE (6) flashing), press once the MFB (1) button, connection will be started. The vocal guidance will prompt a message for intercom activation, BLUE (6) led of F4MC units will lights up.
5.2 Incoming phone calls 5 – Phone/GPS F4MC can be used together with Bluetooth® devices, as mobile phones, GPS devices, MP3 players. To each F4MC unit is possible to connect, in the same time, max two Bluetooth® devices. 5.1 Pairing Before using the F4MC unit with these devices, is necessary to run the pairing procedure. This is necessary only once, after F4MC will automatically recognize and connect devices already paired. Pairing procedure 1.
5.4 Phone tips If two different phones are connected at the same time to a single F4MC unit, the features “Redialling last number” e “Voice dial” can be used only with the FIRST connected phone. The second connected phone can only receive calls, or managed by hand commands directly on the phone. Depending on the phone model it could be necessary to have an active internet connection to use the “Voice dial” feature. The “Voice dial” feature could not be supported by your phone.
When the signal strength is not enough weak to activate the re-tune to an alternative frequency, the listening quality could be decreased due to the low quality of signal. FM stations listening is strongly influenced by the environment (EMC noise, poor signal coverage, etc). 7.2 Song sharing F4MC is equipped with the “SONG SHARING” feature, to share the music streaming among two Interphone MC units.
8 – Auxiliary input Important information F4MC can be connected to a non-Bluetooth® player, thanks to auxiliary input jack. IMPORTANT INFORMATION ON THE PRODUCT BATTERY 8.1 Music listening Do not store the device without charging it. Failure to do so may irreversibly damage the capacity of the battery. Recharge the battery completely every TWO months.
Technical Specifications Bluetooth® compliance: Bluetooth® V.3.
