Operation Manual

User Manual

Installing the External Smart GPS

CM 169CS/CM PRO

Choose a location for the antenna that has a clear view of the sky. Ensure there

are no major obstructions or fixtures in the immediate proximity to the antenna.

The antenna relies on direct “line of sight” satellite reception. If you are unsure

that the chosen location is suitable it may be advisable to mount the antenna in a

temporary manner to verify its correct operation. The thread used on the antenna

(1", 14 TPI) is an industry standard thread used on a wide range of mounting

brackets, including the swivel joints commonly used for angled surfaces. However

due to the manufacturing process of these mounting brackets you may see that

there is some slop when tightening down the antenna to the bracket. This is of no

concern however as the antenna must be tightened until the antenna stops rotat-

ing on the antenna mounting bracket.

Installing GPS Antenna (I)

The antenna design also allows an easy flush mounting.

1. Apply the adhesive mounting template sheet in the area that was veri-

fied to receive satellite signal well

2. Then, following template instruction, drill a 0.31" (8mm) hole and three

0.13" (3.2mm) holes

Ø8 mm [0.31"]

Ø3.2mm [0.13”]

GPS OVERALL SHAPE

Installing GPS Antenna (II)