Operation Manual

82 User Manual

TECHNICAL SPECIFICATIONS

♦ Power consumption : 630mA max @ 10V

♦ Power supply : 10 - 35 Volt dc, 7.5 Watt max

♦ Interface : NMEA0183

♦ Autopilot Interface : NMEA-0180, NMEA-0180/CDX, NMEA-0183

♦ Display : Sun Light Viewable Color LCD (active area 7")

♦ Display Resolution : 480 x 234 pixels

♦ Cartography : C-MAP BY JEPPESEN C-CARD

♦ Operating temperature range: 0°/+55° C

♦ Memory : Non volatile with battery back-up

♦ Keyboard : Silicon rubber, backlight

♦ Weight : Kg 1,1

When the package containing the chart plotter is first opened, please check it for

the following contents (if any parts are missing contact the dealer the chart plot-

ter was purchased from):

♦ External bracket and I/O cable 1,5 mt/5,9 feet

♦ Chart plotter's protective cover

♦ Fuse 2 Amp. + fuseholder

♦ User Manual

♦ Flush mounting kit (CM 169CS)

♦ Smart DGPS WAAS Receiver with cable 15 mt/45 feet (CM 169CS)

C-CARD INSERTING/REMOVING PROCEDURE

Inserting the C-CARD

Open the door, hold the C-CARD by the long side so that you can see the label and

gently push the C-CARD into the door slot (1). Close the door pushing the C-CARD

in as far as it will go to hold fixed into the chart plotter slot (2). When finished the

door must be right closed (3).

Removing the C-CARD

To remove the C-CARD inserted in the chart plotter open the door (1). The C-CARD

will eject out of the chart plotter slot remaining fixed into the door (2). Then

remove the C-CARD from the slot (3).