Operation Manual

47
User Manual
NOTE* Choose the options: OFF (the object is not visible independently of the
selected “Underwater Object Depth Value”); ICON (the object icon is visible
without tags, in the range selected from “Underwater Object Depth Value”
option); ICON+DEPTH (the object icon and tag is visible, in the range selected
from “Underwater Object Depth Value” option).
4.3 GENERAL DISPLAY
To set the general settings:
[MENU] + "SETUP" + [ENTER] + "GENERAL DISPLAY" + [ENTER]
Look Ahead :Allows, when it is On and Home mode is set, to place map on the screen related
to the fix position and direction, so the map shown is that before the ship.
Orient. Resolution : Sets the resolution angle for the Map Orientation, in the range [30, 60] degrees.
Time Reference : Allows switching the Time Reference between UTC or local time, by entering the
Local Time offset.
Time Format :Selects the format for the time between 12 and 24 hours.
Date Format : Selects the Date Format between MM-DD-YY (month-day-year) and DD-MM-
YY (day-month-year).
Time Line :The Time Line is a graphical indication of the direction in which the Vessel is
heading. The Time Line origin is the vessel’s position so the time line movement
is synchronized with the vessels Icon. Time Line course is given by the value
of COG (Course Over Ground) and its length is proportional to the SOG (Speed
Over Ground). It is possible to select the desired value among Off/2/10/30 Min/
1/2 hours/Infinite.
User Points : Object you place on the chart identified by its coordinates and displayed on the
screen with a reference symbol (see Mark, Waypoint). It is possible to select the
mode of display the User Point on the screen among Hidden, Icon or Visible.
Auto Info : Allows displaying information on cartographic object when the cursor is placed
on it. The Automatic Info On Points shows information when the cursor is placed
on points (as Port Services, Tides, lights, wrecks, rocks, buoys, beacons,
obstructions, land markers, etc.). The Automatic Info On All shows information
when the cursor is placed on points, on lines (as Depth contours, Traffic
Separation, Territorial Sea, Cartographic Lines etc.) on areas (Depth, Built-up,
Sea, Attention, Restricted etc.) and on names (on the beginning of the text -hot
spot- or on any of the characters of the name -name message box-). The details
on Land, Source of Data, Cartographic Area and Spot Soundings are not shown.
Keypad Beep :Single audio beeps emitted any time the chart plotter keypad is pressed. If the
incorrect key is pressed or the function required cannot be executed, the chart
plotter emits three beeps. The keypad beep can be enabled or disabled from
the menu.
Nav Aids :Allows to set the Nav Aids presentation as US (Draw Nav-Aids using NOAA
symbology) or INTERNATIONAL (Draws Nav-Aids using international symbol-
ogy). When selected it affects Lights, Signals, Buoys & Beacons display.
4.4 UNITS
To select the desired units of measure:
[MENU] + "SETUP" + [ENTER] + "UNITS" + [ENTER]
Distance :Selects the unit for Distance among Nm, Sm, Km.
Speed :Selects the unit for Speed among Kts, Mph, Kmh.
Depth :Selects the unit for Depth among Ft, FM and Mt.
Altitude : Selects the unit for Altitude of GPS Antenna on the medium sea level. The
available choices are Ft, FL and Mt.
Fuel :Selects the unit for Fuel between Liters or Gallons.
Temperature :Selects the unit for Temperature between F or C degrees.
Wind Speed Unit : Selects the unit for Wind Speed among Kts, m/s, Kmh, Bft.
www.busse-yachtshop.de | [e-mail]