Operation Manual

46 User Manual
docks, cranes...).
Tracks & Routes : Sets On/Off the displaying of the Tracks and Routes (recommended and
established routes for ships at sea, including traffic separation schemes, deep
water routes).
Depth Settings
To control the display on the map of the depth informations.
Depth Range Min :Sets a minimum reference for the Depth Areas.
Depth Range Max : Sets a maximum reference for the Depth Areas.
Land Settings
To control the display on the map of the terrestrial features.
Land Elevation :Sets On/Off the Land Elevation display.
Land Elevation Values :Sets On/Off the displaying of the Land Elevations Values.
Roads :Sets On/Off the displaying of the Roads.
POIs : Sets On/Off the displaying of Points Of Interest.
Chart Settings
To control the display on the map of the chart features.
Lat/Lon Grid :Sets On/Off the displaying of the grid of parallels (of Latitude) and meridians
(of Longitude) drawn on the map.
Chart Boundaries :Sets On/Off the displaying of the Chart Boundaries, which represents the
boundaries of the charts available on the chart plotter. Selecting Auto instead,
if we are in background charts only the first chart levels contained in the C-CARD
are displayed, if we are in a charts level contained in the C-CARD the next four
charts level are displayed.
Value-Added Data :Sets On/Off the displaying of the Value Added Data. The Value Added Data
(VAD) is a collection of additional cartographic objects which are not present on
the original paper chart (from which the electronic chart derives). These objects
have been obtained from other sources and then merged to the electronic charts
in order to provide more information useful for the navigation. VAD object can
be any cartographic objects and it can be distinguished from the official-chart-
objects from the Quick Info. A dedicated icon is shown on the Quick Info window
to indicate that the object queried is a VAD. The same icon is also shown on the
Full Info page and in addition the extended text Value Added Data is shown on
the details of the VAD object.
Chart Lock (*) :Sets On/Off the Chart Lock option. When Chart Lock is On, the available zoom
scales are only the ones containing cartographic data. Instead when Chart Lock
is Off, it is possible to zoom down into zoom scales not covered by cartographic
data after the last available zoom scale covered by cartographic data. The DSI
window, if present, will show “NO CHART”, when an empty level is entered in
the location of map expansion mode.
NOTE* When an empty level is entered, the message “No cartographic coverage” is
shown on a window in a corner of the map display. The warning message is
always displayed as long as the current zoom has no data coverage.
Underwater Objects Settings
To control the display on the Underwater Objects.
Underwater Objects : Selects the max depth value to display Underwater Objects. If value is set to 0 Mt,
the Underwater Objects are not shown on the charts. If value is more than 0 Mt (i.e.
10 Mt), in the Range from 0 Mt to the selected value the Underwater Objects are
displayed according to their setting below. The default setting is 10 Mt.
Rocks :Sets Off/Icon/Icon+Depth* the displaying of the Rocks.
Obstructions :Sets Off/Icon/Icon+Depth* the displaying of the Obstructions.
Diffusers :Sets Off/Icon/Icon+Depth* the displaying of Diffusers.
Wrecks :Sets Off/Icon/Icon+Depth* the displaying of Wrecks.
www.busse-yachtshop.de | [e-mail]