Operation Manual

44 User Manual
Dangers
Red when “Guardian Technology” detects one of the following objects: Land,
Intertidal, Depth Area, Rocks, Obstructions, Shoreline Constructions, Fishing
Facility, Wrecks, Dragged area, Diffusion area, Mooring facilities, Pingos and
Production installations.
Caution
Red when “Guardian Technology” detects cautionary or restricted area.
Chart Language
From the Chart page, [MENU] + "MENU" + [ENTER] + "CHART LANGUAGE" +
[ENTER]
The possible choices are listed in the table below:
Language : Allows setting the language to display chart information. The language is
chosen among the list of languages available on the cartographic data (C-CARD
or embedded charts).
Mode : Defines how objects are translated. It is possible to choose between the three
following options:
Off Uses the same Language used for LANGUAGE. If the selected
language is not present on the objects information, English is
used instead;
English Always uses English;
Local Uses the first Local language present on data. If no Local
language is available, English is used instead.
NOTE a. When User Interface Language is changed, Chart Language settings are set
as follows: MODE is set to Off and Chart Language is set as the User
Interface Language selection if available on the chart data, otherwise is set
to English.
b. If the cartographic data is changed (for example the C-CARD is removed
or replaced), Chart Language settings should be verified and if necessary
changed.
Currents Prediction
From the Chart page, [MENU] + "MENU" + [ENTER] + "CURRENTS PREDIC-
TION" + [ENTER]
A window is shown on the low-left side of the chart. It is possible to see the
variation of the Tidal arrows on the selected area at any given time. Press [SET
TIME] to set the date and time manually, press [INCR]/[DECR] to increase/decrease
time and [EXIT] to exit.
4.2 MAP
To set up the map layout:
[MENU] + "SETUP" + [ENTER] + "MAP" + [ENTER]
Allows the user to customize the following selections and is divided into: Marine
Settings, Depth Settings, Land Settings, Chart Settings and Underwater Objects
Settings.
Display Mode
[MENU] + "SETUP" + [ENTER] + "MAP" + [ENTER] + "DISPLAY MODE" +
[ENTER]
Selects from a predefined table what cartographic objects are displayed and which
display options are set. Preprogrammed settings are user selectable from Full,
Medium, Low, Radar, Tides, Custom. The table below shows the selections for
each mode:
www.busse-yachtshop.de | [e-mail]