Operation Manual

User Manual

4. User Setting Up

4.1 MENU

To set up the map layout:

[MENU] + "MENU" + [ENTER]

Map Orientation

From the Chart page, [MENU] + "MENU" + [ENTER] + "MAP ORIENTATION"

+ [ENTER]

The possible choices are listed in the table below:

North Up :The map is shown with North upwards

Track Up :The map is shown with the ship's current heading upwards

Satellite Imagery

From the Chart page, [MENU] + "MENU" + [ENTER] + "SATELLITE IMAGERY"

+ [ENTER]

TIt is possible to overlay the Satellite image for background map. When it is set

On, the Palette is set to Normal to display the proper colors.

Palette

[MENU] + "MENU" + [ENTER] + "PALETTE" + [ENTER]

It is possible to set the palette used to enhance the visibility of the screen de-

pending on the surrounding light condition. The possible choices are listed in the

table below:

Normal :It is recommended when the chart plotter is not exposed to the direct sunlight.

When this mode is set the maps are displayed in order to use colors as similar

as possible to the ones used in the original paper charts.

Night :It is recommended when the environment is dark in order to reduce the glare

of the display. The chart plotter displays maps and screen in darker colors.

Sunlight : It is designed to enhance the visibility of the screen when the chart plotter is

exposed to the sunlight. The maps are much brighter than in the other modes

and the depth areas are filled with white color so different depth areas are not

easily distinguishable.

NOAA :Allows setting NOAA paper chart colors presentation.

Zoom Type

From the Chart page, [MENU] + "MENU" + [ENTER] + "ZOOM TYPE" +

[ENTER]

Allows more expansions or compression of the chart scale while zooming in or

out. Zoom Mode has two options; Standard (default) or Flexi-Zoom. When in

Flexi-Zoom mode, a short [ZOOM...] push causes a change of chart, whilst a long

[ZOOM...] push (press and hold) causes a pop-up window to be displayed on a

corner of the screen. The window shows the current Zoom Factor. By pressing

[ZOOM IN]/[ZOOM OUT] the map is expanded or compressed according to the

zoom factor selected. The Window is automatically closed if [ZOOM...] is not

pressed for 2 seconds and the selected zoom factor will be used at the next zoom

in/out.

Font & Symbols

From the Chart page, [MENU] + "MENU" + [ENTER] + "FONT & SYMBOLS"

+ [ENTER]