Operation Manual

38 User Manual

Fig. 3.9 - Grounding Alarm sector

Grounding Alarm Range

To set the length of the sector to be detected among 0.25, 0.5, 1.0 Nm.

[MENU] + "MENU" + [ENTER] + "ALARMS" + [ENTER] + "GROUNDING ALARM

RANGE" + [ENTER]

Grounding Alarm Report

To display the report of the dangerous objects currently detected.

[MENU] + "MENU" + [ENTER] + "ALARMS" + [ENTER] + "GROUNDING ALARM

REPORT" + [ENTER]

When any of the searched objects is found in the scanned area, a tick marker is

printed on the relative box to identify which dangerous objects have been currently

detected. Once the alarm condition is no longer present, the relative tick marker is

removed.

NOTE The alarm "No data available" is shown when no specific cartographic data are

found on the C-CARD or when no C-CARD is inserted.

3.10 USER C-CARD

The chart plotter allows to back up Marks, Routes and Tracks to a User C-CARD.

You can also restore the data to internal memory at a later time. This allows

virtually unlimited storage. The User C-CARD data storage is organized as a file

system.

User C-CARD page

To display the content of a User C-CARD inserted into the C-CARD slot of your

chart plotter:

[MENU] + "MENU" + [ENTER] + "USER C-CARD" + [ENTER]

File name

Date and Time of

file creation

Type of data contained in the file

(Mark file, Waypoint file...)

Fig. 3.10 - User C-CARD Menu