Operation Manual

27
User Manual
The following functions work on the Active Route.
Selecting Route Color
To select Route legs color among the eight available colors:
[MENU] + "MENU" + [ENTER] +"ROUTE" + [ENTER] + "COLOR" + [ENTER]
The Route is drawn on the screen in the selected color. It is possible to select a
different color for any Route.
Deleting Route
From the Route menu:
[MENU] + "MENU" + [ENTER] +"ROUTE" + [ENTER] + "DELETE" + [ENTER]
+ [CONFIRM]
From the Chart:
Place the cursor on existing Waypoint or on Route leg + [DEL RTE] + [CONFIRM]
The Route legs and Waypoints are deleted. The Marks linked to the Route are not
deleted. If the destination is placed on the Route, that Route cannot be deleted.
Following a Route (Activate the Navigation)
With the Route shown on the Chart page, move the cursor to the starting Way-
point in the Route and press [GOTO]. The destination is placed on the Waypoint of
the selected Route and you are now navigating to it.
Inserting Waypoint
To insert a new Waypoint between two existing ones:
Place the cursor on the desired Route leg + [INSERT] + move the cursor to the
new position + [ENTER]
The new Waypoint is placed.
To append a new Waypoint to the last Waypoint of the Route:
Place the cursor + [ENTER] + "WAYPOINT" + [ENTER]
Reversing Route
To allow a return Route to be generated from an existing Route.
From the Route menu:
[MENU] + "MENU" + [ENTER] +"ROUTE" + [ENTER] + "REVERSE" + [ENTER]
From the Route Data Report page:
[MENU] + "MENU" + [ENTER] +"ROUTE" + [ENTER] + "REPORT" + [ENTER]
+ [INVERT]
The Route is then followed in reverse order, with Waypoints renumbered accord-
ingly. If the destination is placed on the Route, that Route cannot be reversed.
Selecting Route Report page
To give information on Waypoints belonging to the selected Route:
[MENU] + "MENU" + [ENTER] +"ROUTE" + [ENTER] + "REPORT" + [ENTER]
From this page it is possible to modify the Speed and Fuel consumption values:
[MENU] + "MENU" + [ENTER] +"ROUTE" + [ENTER] + "REPORT" + [ENTER]
+ [SPEED]/[FUEL] + use the cursor to insert values + [ENTER]
Locating Route on Map
To show the current Route on the map.
From the Route Data Report page:
[MENU] + "MENU" + [ENTER] +"ROUTE" + [ENTER] + "REPORT" + [ENTER]
+ [L
OCATE]
The Route Report page is closed and the chart is centered over the first Waypoint
of the selected Route.
www.busse-yachtshop.de | [e-mail]