Operation Manual

26 User Manual
From the User Points List page:
[MENU] + "MENU" + [ENTER] + "USER POINTS LIST" + [ENTER] + use the
cursor to select the row with the desired User Point + [L
OCATE]
The User Points List is closed and the map is centered on the selected User Point.
Sending/Receiving User Point
To send all User Points to an external device through the serial port:
[MENU] + "MENU" + [ENTER] + "USER POINTS LIST" + [ENTER] + [SEND/
R
EC] + [ENTER] + [SEND]
To read User Points from the NMEA input port:
[MENU] + "MENU" + [ENTER] + "USER POINTS LIST" + [ENTER] + [SEND/
R
EC] + [ENTER] + [RECEIVE]
Selecting User Points List page
To give information and allow the editing of all stored User Points:
[MENU] + "MENU" + [ENTER] + "USER POINTS LIST" + [ENTER]
From this page it is possible to find the User Point in the page by entering its
name:
[MENU] + "MENU" + [ENTER] + "USER POINTS LIST" + [ENTER] + [SEARCH]
+ [ENTER] + use the cursor to insert name + [ENTER]
It is possible also to sort all User Points present in the page by Icon type, choos-
ing one of the 16 available icons or all:
[MENU] + "MENU" + [ENTER] + "USER POINTS LIST" + [ENTER] + [ICON] +
[S
ELECT]/[ALL]
NOTE It is not possible to edit/remove/move a Waypoint if it belongs to the active
Route.
3.2 ROUTES
A Route is made by placing a series of Waypoints or by linking existing Marks.
Among the available Routes only one can be the Active Route, that is shown on
the screen by straight lines and arrows to indicate the direction; the first Way-
point of this Route is surrounded by a circle. The Active Route (sometimes called
current) is the working Route: it can be edited by adding, removing or moving
Waypoints.
Selecting Active Route
From the Route menu:
[MENU] + "MENU" + [ENTER] +"ROUTE" + [ENTER] + "SELECT" + [ENTER]
+ use the cursor key to highlight the Route + [ENTER]
From the Route Data Report page:
[MENU] + "MENU" + [ENTER] +"ROUTE" + [ENTER] + "REPORT" + [ENTER]
+ [SELECT] + use the cursor key to highlight the Route + [ENTER]
The Route, shown by straight segments, is centered on the screen, with the cur-
sor on the central Waypoint. This will then allow you to quickly work out which
Route you have selected.
When you want to create a new Route, select an open Route position in the list
using the above procedure.
Creating a Route
To create a new Route:
Place the cursor + [ENTER] + "WAYPOINT" + [ENTER]
This places the first Waypoint of the new Route on your cursor position. If a Mark
is present under the cursor position, the Mark is linked to the Route. To place the
next Waypoints of the Route repeat the above procedure.
www.busse-yachtshop.de | [e-mail]