Operation Manual

32 User Manual
After a few seconds a window appears. Choose the Tide Station you want and
press [ENTER] to display the Tide Graph page. Press [CLEAR] to display the Tide
Station chosen.
Finding Wrecks
To show the nearest Wrecks loaded in the C-CARD:
[MENU] + "FIND" + [ENTER] + "WRECKS" + [ENTER]
Press [ENTER] or [FIND] to locate the selected Wreck on the map.
Finding Obstructions
To show the nearest Obstructions loaded in the C-CARD:
[MENU] + "FIND" + [ENTER] + "OBSTRUCTIONS" + [ENTER]
Press [ENTER] or [FIND] to locate the selected Obstruction on the map.
Finding User Points
To search the User Point by name:
[MENU] + "FIND" + [ENTER] + "USER POINTS" + [ENTER] + use the cursor
to insert name of the Waypoint to show on map + [ENTER]
Finding Coordinates
To center the map at given coordinates:
[MENU] + "FIND" + [ENTER] +"COORDINATES" + [ENTER] + use the cursor
to insert coordinates + [CLEAR]
3.9 ALARMS
The chart plotter provides alarms for various functions. You can enter the desired
alarm range for each function.
Arrival Alarm
To set an acoustic alarm to sound when the vessel is approaching the destination.
[MENU] + "MENU" + [ENTER] + "ALARMS" + [ENTER] + "ARRIVAL ALARM"
+ [ENTER]
XTE Alarm
To set an acoustic alarm to sound when the vessel is deviating from a defined
course.
[MENU] + "MENU" + [ENTER] + "ALARMS" + [ENTER] + "XTE ALARM" +
[ENTER]
Depth Alarm
To set an acoustic alarm to sound when the received depth value (from the depth
transducer) is too shallow.
[MENU] + "MENU" + [ENTER] + "ALARMS" + [ENTER] + "DEPTH ALARM"
+ [ENTER]
Anchor Alarm
To set an alarm to sound when the ship moves off the current ship's position
location.
[MENU] + "MENU" + [ENTER] + "ALARMS" + [ENTER] + "ANCHOR ALARM"
+ [ENTER]
NOTE By the time the Anchor Alarm is set the current ship's position is saved as
origin position. The alarm goes off when the ship moves away from the origin
position more than the entered alarm range.