Operation Manual
26 User Manual
3.6 INFO
Placing the cursor on cartographic objects the information related to the object
nearby is shown.
Setting Automatic Info
Automatic Info allows you to get the information on any cartographic object just
placing the cursor on it. You can select the type of it:
[MENU] + "SETUP" + [ENTER] + "GENERAL DISPLAY" + [ENTER] + "AUTO
INFO" + [ENTER]
The possible settings are Off (no automatic info shown at all), On Points (only on
points e.g. Rocks, Buoys, Lights, Tide Stations) and On All (on all objects, points,
lines and areas).
NOTE Choosing "On All" the Automatic Info will be shown most of the times the
cursor is moved.
Selecting Automatic Info
Move the cursor on the object
The pop-up window with the basic info of the objects is displayed. To get full
details of the object press [EXPAND].
Displaying Expanded Info page (Full Info)
To show the Expanded Info page:
Place the cursor on objects + [MENU] + "MENU" + [ENTER] + "INFO" +
[ENTER]
Info Tree and Expanded Info page
The upper side of the page contains the Info Tree and the Lower side contains the
expanded information. While moving the cursor through the Info Tree, all the rel-
evant information of the selected object is shown on the lower part of the page.
Pressing [CLEAR] the page is closed. If the information shown on the Lower part
of the page exceeds the page size, you may scroll the page using [Page Dn]. Use
[Home] to get back to the first page. When the selected object is a Tide Station,
pressing [ENTER] the Tide page is shown.
Info on objects with Pictures
To get the information on objects with pictures.
Move the cursor on the object
On the Quick Info, there will be the camera icon on the top bar of the window if at
least one of the objects found has one or more pictures associated.
Fig. 3.6 - Example of Quick Info on objects with picture
On the Full Info, there will be the small camera icon on a corner of the square
containing the object icon or a big photo icon centered on the square for the
object without icon.