Serial WAN Adapter Users Guide

Chapter 5: Setting Up the NDIS Driver
iSPAN Serial WAN Adapter Users Guide 71
Setting Up Logical Adapter Network
Properties
After you add a new logical adapter or start the NDIS Driver
setup utility to configure an existing logical adapter, the NDIS
Driver Setup dialog box appears.
Figure 5-3. NDIS Adapter Properties Dialog Box
To set up the logical adapter network properties, do the
following:
1. If needed, start the NDIS Driver Setup utility from the
control panel, as described in Starting the NDIS Driver
Setup Utility on page 64.
2. In the Adapter section of the NDIS Driver Setup dialog
box, click the Properties button.