Serial WAN Adapter Users Guide

Hardware Management
162 Interphase Corporation
To display the SR Port Properties dialog box:
1. Start the WAN Adapters Setup utility, if needed, as
described in Starting the WAN Adapters Setup Utility on
page 146.
2. In the Cards section of the dialog box, select the
adapter’s serial port:
The SR Port Properties dialog box appears.
Figure 9-10. SR Port Properties Dialog Box
3. In the Interface field, select the serial line interface type
that matches your provider’s serial line interface.
4. In the Modem signals field, select how you want
modem signals to be handled. (If you are unsure which
option to select, use the default option, External
modem.)
5. Click OK to save the serial port properties.
If you are installing the NDIS driver software, return to step 4
of Setting Up WAN Properties on page 43.
If you are installing SNA Server Link Services software, return
to step 4 of Setting Up WAN Properties on page 112.