User's Manual

1.10 prox.pad plus
Operation
Once installed a nd programme d successf ully, the
prox.pad plus controller stores all transactions and
controls all outputs. The controller receives data sent
to it from the proximity reader, decides if access should
be provided or not, and then energizes the door lock
or not, locking or unlocking the door.
The prox.pad plus unit includes two relay outputs
(located internally), an internal clock, programming
keypad, and memory chips to store user information
and a transaction data log.
An external IR (infrared) LED/port/transmitter at the
top right of the prox.pad plus controller allows for
printing of the Transaction Log and the Programmed
User List to the optional IEI PDA Data Capture Device
(DCD) software. Chapter 4 discusses printing reports.
NOTE: IEI recommends that first-time installers test
the prox.pad plus unit BEFORE actually mounting
and wiring the unit to become familiar with its op-
eration (see Chapter 2).
1.10 prox.pad plus Operation Chapter 1: Introduction
prox.pad plus Install/Program. Manual, PPP, D2 1-5