User's Manual

T
Technical Support, 1-1
Testing the Controller/Keypad, 3-16
Testing the prox.pad plus, 3-16
Time/Date Set, 4-24
Timed Anti-Passback, 4-27
Timezone/Holiday Features, 4 -21
TROUBLESHOOTING, Chapter 5, 5-1
before calling iei, 5-1 - 5-3
correcting possible water problems,
5-9
flow charts, 5-4 - 5-5
performing power supply integrity
test, 5-6 - 5-8
silicone, 5-9
troubleshooting chart, 5-2
wire run, 5-9
Troubleshooting Chart, 5-2
Turning Audio Keypress Feedback
ON/OFF, 4-25
Turning Visual LED/Keypress Indica-
tor ON/OFF, 4-24
U
User Lockout Option, 4-19
Using the Printing Features, 4-29 -
4-33
W
Warranty, 1-2
Wire Run, 5-9
WIRING, Chapter 3, 3-1
networking multiple prox.pad plus
units together, 3-14 - 3-15
prox.pad plus communications, 3-13
testing the controller/keypad, 3-16
testing the prox.pad plus, 3 -16
wiring the alarm shunt relay, 3-1
wiring the aux relay for use as alarm
shunt, 3-1
wiring the aux relay for use as forced
door, 3-3
wiring the aux relay for use as
propped d oor, 3-5
wiring the door contact input, 3-7
wiring the forced door relay, 3-3
wiring the main relay, 3-11
wiring the propped door relay, 3-5
wiring the prox.pad unit, 3-1 - 3-12
wiring the rex switch (request to
exit), 3-9
Wiring the Alarm Shunt Relay, 3-1
Wiring the AUX Relay for Use as
Alarm Shunt, 3-1
Wiring the AUX Relay for Use as
Forced Door, 3-3
Wiring the AUX Relay for Use as
Propped Door, 3-5
Wiring the Door Contact Input, 3-7
Wiring the Forced D oor Relay, 3-3
Wiring the M ain Relay, 3-11
Wiring the Propped Door Relay, 3-5
Wiring the prox.pad Unit, 3-1 - 3-12
Wiring the REX Switch (Request to
Exit), 3-9
Index
prox.pad plus Install/Program. Manual, PPP, D2 I-5