User's Manual

Led Indicators/Soun der Operations
LED or Sounder
Visual/Audible
Condition
Description
Yellow LED Slow blink Unit is in Program mode
Rapid blink
Verify mode is active (checking that the last two
values in sequence match)
Steady Program error; to clear, press * or error lockout
Very rapid blink
Memory (eeprom) erase is in progress
(commands 40/46, loop-back)
Bi-color LED Steady red Lock output deenergized
Steady green Lock output is energized (timed or latched)
Red/green alternating
Awaiting second PIN during “Card AND Code”
access attempt
Green blink Auto-unlock active
Sounder
Short beep
(100 ms) every 2
seconds
Audio alert #2 is active
Sounder 1/2 sec on,
1/2 sec off
Audio alert #1 is active
Double beep Lockout is canceled
Pair of double beeps Lockout is activated
3 slow beeps (250
ms), then single beep
Self-test is complete
Sounder After
PIN/Card
1 single beep Valid card access
1 long beep followed
by 1 short beep
User disabled
1 long beep followed
by 2 short beeps
Bad timezone
1 long beep followed
by 3 short beeps
User lockout
3 rapid beeps after
code entered or card
presented
Code or Card is not found
4 quick beeps First-In Auto-unlock
6 quick beeps Toggle mode is active
Prox.pad plus Access System Installer Guide
22 Part No. 6045679, Rev. 1.0, D5