User's Manual

Action Press Details
22. Delete block of
consecutive users
58 # start user # start user # number of users
* number of users *
23. Dump transactions
to IR port
70#0#0#**
This command must be
used while in Program
mode
24. Set/clear event log
mask
73#event#set/clear#**
See options below; all
events are logged by
default unless stated
otherwise below
Event
1-access denied - invalid PIN
2-program denied
4-REX
5-Propped Door
6-Door Closed
7ForcedDoor
16-log dumped by user #N
17-access granted to user #N
19-access denied to user #N, bad timezone
20-togglemodeactivatedbyuser#N
(latch set)
21 - toggle mode de-activated by user #N
(latch clear)
22 - 1st in auto-unlock triggered by user #N
23 - door relocked by user #N
24 - user lockout enabled by user #N
25 - user lockout disabled by user #N
26 - access denied to user #N - user is
disabled
27 - card/code mismatch
29 - program mode started by user #N
30 - log erased by user #N
32-unprogrammedcarddata
33 - unprogrammed code data
50 - log retrieved
51 - access denied to user #N, user group
lockout
Events 30 and 50
cannot be disabled
Events 32 and 33 are
disabled by default
25. Reset (erase)
transaction log
76 # 00000 # 00000 # **
26. To exit Program
mode
*(afterfinalcommand)
Yellow stops flashing
Program Commands (cont inu ed)
Prox.pad plus Access System Installer Guide
Part No. 6045679, Rev. 1.0, D5 21