User Manual

17
For additional information, see Transaction Log.
To LED
location
Infrared
Printer
(52-2069)
Door Name 5666
Seq User Trans
0 001
1 003
2 003
3 020
4 003
Transaction
Number
Transaction
Type
User
Number
Door
Name
Note: Seq. # 0 is the
programming request
to output the entries.
Sequence numbers
1-9 are the actual
entries.
Hold an infrared printer up to the red
infrared LED (as shown). An HP82240B
Infrared Printer can be used to download
information from the keypad to a printout.
To Program Door Name into Keypad
99# Master Code* Yellow LED Blinks
43# 0# Door Name# (Must be four digits) Yellow LED Blinks
* Yellow LED Blinks Quickly
* Yellow LED Blinks Slowly (If Solid, see Note)
* Yellow LED Goes Out
If SofLink Plus is being used, door name must be changed via PC
To Interrogate Transaction Log
99# Supervisory or Master Code* Yellow LED Blinks
70# 0# 0# Yellow LED Blinks
* Yellow LED Blinks Quickly
* Yellow LED Goes Out (If Solid, see Note)
To Reset / Clear Transaction Log
99# Master Code* Yellow LED Blinks
76# 00000# 00000# Yellow LED Blinks
* Yellow LED Blinks Quickly
* Yellow LED Goes Out (If Solid, see Note)
To Delete a User Number
99# Master Code* Yellow LED Blinks
User Number# Yellow LED Blinks
* Yellow LED Blinks Quickly
* Yellow LED Blinks Slowly
* Yellow LED Goes Out (If Solid, see Note)
Varies