User Manual
16
To Enter the Emergency Code (Unlock Duration 10 Seconds)
99# Master Code* Yellow LED Blinks
50# 2# Emergency Code* Yellow LED Blinks Quickly
Emergency Code* Yellow LED Blinks Slowly (If Solid, see Note)
* Yellow LED Goes Out
To Change the Supervisory Code
99# Master Code* Yellow LED Blinks
50# 1# 03# Supervisory Code* Yellow LED Blinks Quickly
Supervisory Code* Yellow LED Blinks Slowly (If Solid, see Note)
* Yellow LED Goes Out
• Factory Default Supervisory Code is 4321
To Enter a User Code
99# Supervisory or master Code* Yellow LED Blinks
50# 1# User number (04-97)# User Code* Yellow LED Blinks Quickly
User Code* Yellow LED Blinks Slowly (If Solid, see Note)
* Yellow LED Goes Out
To Enter a Passage (Maintained) Code
When this code is used, it must also be used to re-lock the device.
99# Supervisory or master Code* Yellow LED Blinks
50# 2# User number (04-97)# User Code* Yellow LED Blinks Quickly
User Code* Yellow LED Blinks Slowly (If Solid, see Note)
* Yellow LED Goes Out
To Enter a One Time User Code
99# Supervisory or Master Code* Yellow LED Blinks
50# 5# User number (04-97)# User Code* Yellow LED Blinks Quickly
User Code* Yellow LED Blinks Slowly (If Solid, see Note)
* Yellow LED Goes Out
To Deactivate / Reactivate "Beep" With Key Stroke
99# Supervisory or master Code* Yellow LED Blinks
30# 0# 0# (Off) (1# = On) Yellow LED Blinks
* Yellow LED Blinks Quickly
* Yellow LED Blinks Slowly (If Solid, see Note)
* Yellow LED Goes Out
Note: If turning Beep OFF, No audible on last two steps.
To Clear the Entire Memory
99# Master Code* Yellow LED Blinks
46# 00000# 00000# Yellow LED Blinks
* Yellow LED Blinks Quickly
* Yellow LED Goes Solid and Begins to Blink
* Yellow LED Goes Out (If Solid, see Note)
This Deletes ALL Codes, including Master, Emergency and Supervisory. The Master Code is set
back to 1234*, Door Number to 0001 and Unlock Time to 5 Seconds. If the master Code is not
known, Factory Assistance will be required to clear the memory. Call 1-800-810-9473