User Manual

Installation Instructions (Continued)

Step #4 Installation of Inside Lever/Outside Cylinder

SARGENT

Note: Key and the

cylinder must be

rotated as shown

Correct Wrong

Very Important

• Slide lever handle onto spindle until fully seated.

Be sure handle is horizontal and facing to the rear of door

• Tighten the set screw securely with

1/8" hex wrench

• Put the turn lever

in the up position

• Align cylinder

• Screw cylinder

lockbody unit

• Tighten the set

screw to prevent

unscrewing of the

cylinder

• Turn the key way in

the cylinder to make

certain that the locking

or latching mechanism

function correclly.

Outside of Door

Type 43 Mortise

Cylinder ONLY

Key

Inside of

Door

•

Set

Screw

Inside Lever

Phillips

screwdriver

Set screw