User Manual

9
Installation Instructions (Continued)
Step #1 Installation of Lockbody/Attaching Lockbody Screws
Inside of
Door
(2) #12-24 x 1/2" long
Flat Head Screw
for metal doors
(2) #12 x 1 1/4" long
Flat Head Wood Screw
for wood doors
•
Wires and Connector go into the mortised
area and out of the inside cylinder hole
• Insert Lockbody
in mortised cutout
• Hold loosely in place with (2) Lockbody screws
• DO NOT TIGHTEN SCREWS AT THIS TIME
MUST feed
Connector
& Wires thru
non-cylinder
side.