User's Manual

A7817A
2
Table Of Contents
TABLE OF CONTENTS .................................................................................................. 2
SECTION 1: INTRODUCTION........................................................................................ 3
1.1 PRODUCT DESCRIPTION ................................................................................................... 3
1.2 PRODUCT FEATURES........................................................................................................ 3
1.3 S
PECIFICATIONS............................................................................................................... 4
1.4 LED F
UNCTIONS.............................................................................................................. 5
SECTION 2: SYSTEM OPERATION............................................................................... 6
2.1 PRESENTING A PROXIMITY CARD / ENTERING A KEYPAD CODE ............................................ 6
2.2 OPERATING THE SOLENOID.................................................................................................... 7
2.3 CONTROLLING THE REQUEST TO EXIT, DOOR POSITION SWITCH, DEADBOLT MONITOR AND
LATCH BOLT MONITOR................................................................................................................ 7
SECTION 3: SYSTEM CONFIGURATION...................................................................... 8
3.1 SELECTING THE READER ADDRESS........................................................................................ 8
3.2 CONFIGURING THE SOLENOID ................................................................................................ 9
3.3 ENABLING THE TAMPER SWITCH ........................................................................................... 9
3.4 CONFIGURING THE READER LED OPERATION ....................................................................... 9
3.5 DIP-SWITCH SETTING CHART .............................................................................................. 10
SECTION 4: WIRING.................................................................................................... 11
4.1 READER CONNECTOR DIAGRAM .......................................................................................... 11
4.2 INTERFACE MODULE CONNECTOR DIAGRAM....................................................................... 12
4.3 AUXILIARY (AUX) RELAY BOARD CONNECTOR DIAGRAM.................................................. 13
4.4 WIRING THE READER TO THE INTERFACE MODULE USING ONE POWER SUPPLY ................. 14
4.5 W
IRING THE READER TO THE INTERFACE MODULE USING MULTIPLE POWER SUPPLIES ..... 15
4.6 W
IRING A SOLENOID TO THE READER .................................................................................. 16
4.7 C
ONNECTING THE AUX RELAY BOARD TO THE INTERFACE MODULE .................................. 17
4.8 WIRING A DOOR POSITION SWITCH (DPS), REQUEST TO EXIT (RX) SWITCH, LATCH BOLT
(LX) AND DEADBOLT MONITOR (DX) SWITCH TO THE READER................................................ 18