User Manual

Action Press Details
10. Clear eeprom
memory and
restore default
settings
46 # 00000 # 00000 # **
User Types
0 = toggle code
1 = standard access
3= lockout
4 = extended unlock
5= singleuse
6= relockcode
7 = emergency
8= communicationsenable
11. Program “code
only” user
50#type#location#keypin*
key pin *
See user types
above
12. Program “card
only” user by
presentation
50#type#location#**
<present card>
See user types
above
13. Program “card
AND code” user
50#type#location#keypin*
key pin * <present card>
See user types
above
14. Delete user
50#0#location#**
See user types
above
15. Program 26-bit
“card only” user
without presenting
card
51#type#location#cardpin*
card pin *
Location must be
greater than 2;
master/supervisor
cannot be set as
“card only”
16. Program “card
OR code” user
52#type#location#keypin*
key pin * <present card>
1.5 Programming Commands
1-30 DoorGard LS2/LS2P System Programming Manual, D3