User Manual

1.5 Programming
Commands
If you need to change any of the program default
values or wish to add functions, first enter program
mode and then enter the desired program command.
Defaults are in bold.
Table 1-5. Program Commands
Action Desired Press Details
To enter program
mode
99 # (Master Code) *
Yellow LED blinks
slowly
1. Set lock time
11 # tt # 0 # **
where tt is the
number of
seconds to
operate lock on
access (1-99
maximum);
defaults to 5
seconds
1.5 Programming Commands
1-26 DoorGard LS2/LS2P System Programming Manual, D3