User Manual

Table 1-3. DoorGard LS2/LS2P LED Indicators/Sounder Operations
LED or
Sounder
Visual/Audible
Condition
Description
Bi-color
Steady green Door unlocked (timed or latched)
Green drop out
Auto-Unlock active (unlocked) green LED
drops out for 100 ms every second
Alternating red/green
Awaiting second PIN of “card and code”
user
1/2 second green
flash
Following a 5#PIN* sequence indicates
programmed “Single Use” PIN
Single red flash Prox card detected
Double green flash Valid prox card read
Double red flash Invalid prox card read
Yellow LED
Slow blink System is in program mode
Rapid blink
Verify mode is active (checking that the last
two values in sequence match)
Steady Program error; to clear, press *
Steady (5 seconds) Error lockout (no keypress feedback)
Very rapid blink
EEPROM erase in progress (cmd 40, cmd
46, full board reset)
Pulsing rapid blink Block delete of user in progress (cmd 58)
Sounder After
PIN Entered
3 very rapid beeps PIN is not found
Double beep User lockout is canceled
Pair of double beeps User lockout is activated
1 long beep
followed by 1 short
beep
Access is denied, “user disabled”
1.3 Programming Keypad Options and Parameters
DoorGard LS2/LS2P System Programming Manual, D3 1-17