User Manual

A.M. (turn back one hour). When set to European
format, daylight savings begins on the last Sunday in
March at 2:00 A.M. (turn back one hour) and ends on
the last Sunday in October at 2:00 A.M. (turn back one
hour).
1.3.10.D Leap Year
The LS2/LS2P system supports leap year; on the ap-
propriate leap years February 29th is a valid date.
1.3.10.E Time/Date Set
The time is set using command 41 and is in 24-hour
format. The date is set using command 42. NOTE: The
Time/Date is not reset with the default command. To
set the Time, enter:
41 # hhmm # 0 # **
[hhmm=hour and minute (24-hour format)]
To set the Date, enter:
42 # mmddyy # dow # **
[mmddyy=month, day, year
dow=day of week (1=Sunday,
2=Monday, etc.)]
1.3.11 Transaction
Event Log
Up to 2000 transaction log events can be stored in the
LS2/LS2P system. See command 73 in the command
list (Table 1-5) for the list of transactions. To delete the
transaction log, use command 76. Transactions can
only be viewed if you are using the PDA software and
Hubmanager Pro 4.x.
1.3.12
Communications
The LS2/LS2P system supports IRDA communications.
The IRDA transceiver is located on the right-hand side
of the keypad faceplate, and is used to communicate
with a PDA device with IEI PDA software for use in
Hubmanager Pro 4.x.
1.3 Programming Keypad Options and Parameters
DoorGard LS2/LS2P System Programming Manual, D3 1-15