User Manual

1.3.10.A Midnight Crossing TimeZones
The LS2/LS2P system supports “midnight crossing
timezones,” which is enabled by default. This means
a timezone can cross the midnight boundary. For ex-
ample: A timezone can start at 11:00 P.M. and end at
7:00 A.M. This option can be disabled using Command
30 option 10. To disable, enter:
30#10#0#**
Entering 1 instead of 0 enables the option.
1.3.10.B Holidays
The LS2/LS2P system supports up to thirty-two (32)
holidays. Holidays can be single days or block holidays
(one block holiday counts as only one holiday; you can
have up to thirty-two block holidays).
A block holiday is a group of days with a beginning
and end date. This is useful if you want a whole week
to be considered a holiday. A block holiday can be up
to one year long.
1.3.10.C Daylight Savings Time
Daylight savings time is also supported and is enabled
by default. This can be changed using command 30
option 13. To disable, enter:
30#13#0#**
Entering 1 instead of 0 enables the option.
The LS2/LS2P system currently supports U.S. and
European daylight savings formats, and this can be
changed using command 30 option 15. U.S. is the de-
fault value. To specify U.S.A., enter 0, European 1:
30#15#0#**
When set to U.S. format, daylight savings begins on
the first Sunday in April at 2:00 A.M. (turn back one
hour) and ends on the last Sunday in October at 2:00
1.3 Programming Keypad Options and Parameters
1-14 DoorGard LS2/LS2P System Programming Manual, D3