Use and Care Guide
PROBLEM
Light will not come on.
Linked Lights to do not
turn on.
A. Fixture not properly connected.
B. Pull chain not engaged.
C. Fixture not receiving power.
A. A.
A. Check wires to ensure proper
connections.
B. Pull chain to activate light.
C. Check to make sure breaker is
on and test another working
electrical device to make sure it
is receiving power.
Check all linked shop lights
ensuring power cords are all
properly installed.
POSSIBLE CAUSE SOLUTION
TROUBLE SHOOTING
17”
11”
Fold Fold
Fold Fold
EN | 4
Bluetooth audio does
not work.
Audio can be heard out
of first shop light only
in linked chain.
A. Check to make sure aux cables
are properly installed on all
linked lights.
Linked power cords may not be
plugged in.
A. Bluetooth not active or not close
enough to device.
B. Bluetooth may be paired to wrong
device.
C. Device volume may be low or
muted.
A. Ensure your device's Bluetooth is
turned on, in range and
discoverable.
B. Make sure you are selecting the
correct device to pair to.
C. Makes sure your audio level is
set appropriately.
A. Aux Cords are not connected on
linked lights.
NOTE:
The Bluetooth brand elements may not be used in a fashion or manner
that could impair or otherwise damage the goodwill associated with the
Bluetooth brand or the Fellow Adopters (Sky Rich Star Limited).
The Bluetooth brand elements shall therefore not be used in connection
with products and services that do not enable any Bluetooth wireless
functionality or in connection with unlawful, obscene, pornographic,
excessively violent, hazardous,or otherwise poor-taste activities.
LED 4' Linkable Shop Light
with 5W Bluetooth Speaker
Use And Care Guide
Read And Save These Instructions Before Use
EN
Model: BT0450DS0810
International Development Company
899 Henrietta Creek Rd.
Roanoke, TX 76262 USA
Toll-free: 1-877-723-0723
Made in China
© 2019 IDC, all rights reserved.
The Honeywell Trademark is used under license
from Honeywell International Inc.
Honeywell International Inc. makes no
representations or warranties with respect
to this product. This product is manufactured for
International Development Company.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user authority to operate the equipment.
**********************************************************************************************
FCC WARNING:
NOTES:This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
RF EXPOSURE: This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with minimum distance of 20
cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.