Instructions / Assembly

ITEM NO. : SH-3227A
REVISED : APR 08, 2016
Printed in Vietnam
- 5 -
STEP 2
Slide back panels (E), and (F) and (G) into the grooves as shown below .
Attach back panel (G) to bottom panel (C) with pan head screws (9). Then attach back panels (E),
and (F) and (G) to shelf panels (D) with pan head screws (9) and washers (10) as shown below.
Tighten with a screwdriver.
Remove the paper strip and attach sticky side of connecters (H) to back of the unit. Then attach
connecters (H) to the top (A), and bottom panel (C) and shelf panels (D) with pan head screws (9) as
shown below. Tighten with a screwdriver.