Instructions / Assembly

ITEM NO. : SH-3224A
REVISED APR 06, 2016
Printed in Vietnam
- 4 -
STEP 1
Attach side panels (B) to the top (A), and shelf panel (D) and bottom panel (C) with bolts (1), and
washers (2) and (3) as shown below. Tighten with Allen key (4).
Slide back panels (E) and (F) into the grooves as shown below .
Attach back panel (F) to bottom panel (C) with pan head screws (9) as shown below. Then attach
back panels (E) and (F) to bottom panel (D) with pan head screws (9) and washers (10). Tighten with
a screwdriver.
Remove the paper strip and attach sticky side of connecters (G) to back of the unit. Then attach
connecters (G) to the top (A) and bottom panel (C) and shelf panel (D) with pan head screws (9).
Tighten with a screwdriver.
STEP 2