ASSEMBLY INSTRUCTIONS Description Item No. : 32 X 12 X 48 HIGH BOOK CASE RTA : SH-3224A ITEM NO.
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased. If hardware is missing, or you need help with assembly, please call toll free 888-944-8396.
PARTS LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following parts: NO Description Qty A Top C Bottom panel E G Back upper (Large) Connecter Sketch NO Description Qty 1 B Side panel (L-R) 2 1 D Shelf panel 1 1 F Back lower (Small) 1 2 H Adjustable shelf 2 Sketch HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging.
STEP 1 Attach side panels (B) to the top (A), and shelf panel (D) and bottom panel (C) with bolts (1), and washers (2) and (3) as shown below. Tighten with Allen key (4). STEP 2 Slide back panels (E) and (F) into the grooves as shown below . Attach back panel (F) to bottom panel (C) with pan head screws (9) as shown below. Then attach back panels (E) and (F) to bottom panel (D) with pan head screws (9) and washers (10). Tighten with a screwdriver.
STEP 3 Attach brackets (5) to the unit as shown below. Then place the shelves (H) on the brackets and attach with screws (6). Tighten with a screwdriver. Attach steel bands (8) to the unit with screws (6). Then attach the steel band to a wall with screws (7) as shown below (to secure the product and prevent tipping). Tighten with a screwdriver. ITEM NO.
