ASSEMBLY INSTRUCTIONS Description : 24” MADRID STOOL : S-402 Item No.
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased. If hardware is missing, or you need help with assembly, please call toll free 888-944-8396.
HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Qty Sketch NO Short bolt (M6x60mm) Long bolt Screw 4 4 (M6x70mm) 10 (M4x35mm) Lock washer Flat washer 11 5 Sketch 4 2 (M6x40mm) 3 Qty Medium bolt 3 1 Description 11 6 ( Φ6.5xΦ11mm) ( Φ6.
STEP 2 Attach front legs (D) to the seat frame with bolts (2), washers (6) and (5). Tighten with Allen key (7). Attach front stretcher (E) between front legs and attach side stretchers (F) to front and back legs with screws (4) as shown below. Tighten with a screwdriver. STEP 3 Attach the seat (C) to top of the seat frame (from Step 2) with screws (4). Tighten with the screwdriver.
