ASSEMBLY INSTRUCTIONS STEP 4 STEP 4 Description Item No.
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased. If hardware is missing, or you need help with assembly, please call toll free 888-944-8396.
HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Qty 1 Bolt (M6x60mm) 2 3 Sketch NO Description Qty 8 4 Knob (40x30mm) 1 Flat washer (6.5x19mm) 8 5 Pan head screw (M4x30mm) 1 Spring washer (6.5x11mm) 8 6 Allen key (4x80mm) 1 Sketch STEP 1 Attach the Legs (B) to top (A) with Bolts (1), and washers (3) and (2), as shown below.
STEP 2 Attach the knob (4) to the drawer front with a screw (5). Tighten with a screwdriver.
